Technical infos

This page contains technical infos, opinions of manufacture of parts...
In short what to solve some problems of maintenance of your racing cars.

Truc et astucesRemakeCalculator

Les trucs et astuces

The club holds at the disposal of its members a very complete list of improvements to do on cars to increase their performance or reliability.
Adhere and would have there you right!

Remakings of parts

1. Le Club finally remade badges of cap, identical to the last badges manufactured by Martin and in conformity with the official logo of the manufacturer.

   

   Enamelled badges yellow and black, rounds, of diameter 60mm, with 2 threaded rods with the back for fixing on cap. The Club also made manufacture badges that one can stick to the center of the wheel, or on the pommel of the gear shift lever. Or elsewhere, we are in democracy. Even logo that badges of cap, but in diameter 20mm, smooth reverse. And the Club also has pin' S. Identical to the badges of wheel of diameter 20mm, but with traditional fixing pin' S on rear.
   Price

   • Badge of cap 120 FF (not of the fake: it weighs 75 G!)
     
   • Insigne of wheel 35 FF
     
   • Pin' S 35 FF
     
   • Add 30 FF for the packing + fresh of port in recommended (R2).
   Send your command to the address of the Club, by joining your order check of the " Automobile club Martin ".

2. A grouped order at Record-France already be placed to have shock absorbers of replacement for Seven Serie II and III with firmer values. In front of the success of this operation, contact the club if you are interested to supplement the list of the 10 people minimum whom it is necessary to justify the command of the 20 units imposed by the factory. It is necessary to count approximately 840F including all taxes delivered for the 2 cartridges which are assembled instead of old without any modification. Only damping is different: 70/90 daN in compression, 130/220 daN in relaxation respectively with 130 and 265 mm/s, values modifiable for the batch according to your tastes without modification of price. Guarantee 1 year. Shock absorbers for Cobra or Seven S‚rie I can also be controlled if another series of 20 is respected. Their diameter in this case will be different for Series I: 39 instead of 45.

Calculatrice

Your speedometer didn't give the right distance ?
Here's a helpful calculator which can give you conversion between distance.