Twilli cap with 3D embossing for hard-wearing everyday use
The Gear-S Cap from Atlantis is the considered answer for motorsport teams, trades businesses and outdoor brands looking for a more substantial cap with a clear signature look. The 6-panel construction in hard-wearing twilli quality at 300 g/m² is deliberately heavier and more dimensionally stable than classic runner caps and reliably holds its front silhouette even after intensive use. The 3D embossing on the front panel in waffle and carbon look is structurally worked into the fabric and feels premium and technical without becoming intrusive — the embossed structure continues across the top of the peak and creates a coherent signature signature that clearly sets the cap apart from uniform standard baseball caps. The smooth side and rear panels offer space for embroidery, patches and transfer printi, while the structured front area is deliberately kept as a signature area or decorated with transfer or patch. The colour-matched under-peak and the self-coloured top button carry the tone-in-tone finish through to the last detail. Four classic colours — White, Black, Navy and Red — cover both classic club and expressive motorsport colour worlds; the polyesteri comes from recycled material.


Atlantis
Italienische Cap-Manufaktur mit Heritage.
Atlantis Headwear (Master Italia S.p.A., Venetien) ist eine der europäischen Referenzen für Caps, Beanies und Bucket Hats. Seit 1995 werden Schnitte, Materialien und Stickflächen konsequent für Veredler optimiert; seit 2024 ist Master Italia eine Benefit Corporation.
Italienische Headwear-Tradition seit 1995
Sandwich-Visor mit hartem Kern
Recycelte Linien in fast jeder Form
Trucker, Snapback, Bucket, Beanie
Atlantis Headwear wurde 1995 von Gianni Pasin als Master Italia in San Donà di Piave (Provinz Venedig) gestartet - aus dem Drei-Personen-Betrieb wurde eine der größten europäischen Cap-Marken.
What is inside the AT533?
Recycled polyester in heavy twill quality with 3D embossing.
100 per cent recycled polyester
The fabric is made entirely from recycled polyesteri — the fibre comes from reprocessed material rather than virgin plastic. A deliberate contribution to resource efficiency that is increasingly expected in values-driven corporate and motorsport procurement, upgrading the cap versus virgin alternatives.
Twill structure with 3D embossing
The polyesteri is woven into a twilli structure and deliberately laid out heavy at 300 g/m². The 3D embossing on the front panel is structurally worked in and sits as a visible waffle and carbon look on top of the twill base. The two elements together create the signature signature of the cap that clearly stands out from the standard cap segment.
Responsibility in numbers
the polyesteri comes entirely from recycled material and reduces the demand for virgin plastic in textile production by the corresponding share
the substantial material quality extends the service life and reduces short-term re-orders compared with lightweight standard baseball caps
the consistent tone-in-tone finish without a visible front label leaves the signature area to your own team or company logo rather than the manufacturer brand
the one-size construction with hook-and-loop closure covers different head sizes with a single order and reduces returns due to incorrect fit
6 reasons for the AT533
3D-embossed front panel
The front panel is structurally fitted with a three-dimensional embossing in waffle and carbon look that feels premium and technical and clearly sets the cap apart from uniform standard baseball caps. The embossing is worked into the fabric itself and remains dimensionally stable over the service life — no printed detail that flakes off over time.
300 g/m² twill quality
The 300 g/m² weight feels substantial and dimensionally stable — noticeably heavier than classic runner caps and standard baseball caps at 105 to 200 g/m². The wearer feels the material quality immediately by hand, and the front silhouette stays clean even after intensive use rather than pulling out of shape over time.
Recycled polyester
The twilli fabric is made from recycled polyesteri — a deliberate contribution to resource efficiency that can be robustly justified in procurement processes with sustainability requirements. For corporate weari programmes and for values-driven motorsport and trades brands, a credible argument alongside the classic signature look of the cap.
Tone-on-tone finishing
The cap is finished consistently tone in tone — no visible front label, colour-matched under-peak, self-coloured top button on the crown. The signature signature stays restrained and gives the full stage on the smooth side and rear panels to your own club logo, team emblem or company motif.
Hook-and-loop closure for size adjustment
The hook-and-loop closure at the back allows individual width adjustment and makes the one-size cap wearable across different head sizes. A clear advantage over fitted caps with a fixed size — with the AT533, a single order fits the entire team or company run of approximately 55 to 60 centimetres head circumference.
Pre-curved peak
The peak is structurally pre-curved and keeps its shape throughout the service life. Classic standard caps with a flat peak are curved after the fact by the wearer — here the curve is cleanly set from the factory and the decorative stitching at the panel seams underlines the premium finish.
Who orders the AT533?
Motorsport teams and clubs
For motorsport, road-cycling and trend-sport teams with a uniform appearance at races and presentation dates. The 3D embossing in waffle and carbon look suits the technical and sporty context of motorsport, the four base colours cover classic team colour worlds and the 300 g/m² weight signals material quality that matches sporting ambitions.
Trades and building trades
For building trades, electrical and plumbing businesses with a uniform corporate appearance. The robust twilli quality stands up to everyday life on the building site, and the smooth side panels offer space for the company logo and industry lettering. The 3D front embossing sets a technical character that fits the trades context.
Corporate wear and team
For companies with outdoor appearances, trade fair attendances and customer roadshows looking for a substantial cap as premium corporate kit. The 300 g/m² weight signals appreciation towards employees and customers, and the four base colours cover the classic corporate colour worlds.
Promotional products and merchandising
As a premium merchandise item for corporate events, customer relationship management and team Christmas gifts. The substantial material quality and the 3D embossing clearly set the AT533 apart from standard promotional caps — the recipient feels the quality immediately, which noticeably upgrades the corporate merchandise character.
Size overview

- One Size
Volume pricing – order more, save more
The larger the run, the lower the unit price. Ideal for motorsport teams, trades businesses and corporate wear.
What you should know about the AT533
The 3D embossing is structurally worked into the fabric and sits as a light relief structure on the front panel and the top of the peak. It feels premium and technical without appearing intrusive and remains dimensionally stable over the service life — no printed detail that flakes off or fades over time.
The twilli weight is deliberately laid out heavy and reliably holds the front silhouette even under intensive use. Classic standard baseball caps at 200 g/m² pull out of shape over time — the AT533 remains dimensionally stable and the pre-curved peak keeps its curve, which noticeably extends the everyday value of the cap.
Embroidery, transfer printi and screen print sit cleanly on the smooth side and rear panels. Decoration on the 3D-structured front area is possible on a limited basis — transfer print and patches are the classic choice here because they do not let the embossed structure bleed. Pure embroidery on the embossed front can interrupt the 3D look.
Hand wash recommended according to the manufacturer's instructions. Do not iron on the embossed structure, do not dry clean and do not tumble dry — all three treatments can attack the 3D embossing or damage the twilli structure. To dry, pull the cap into shape and let it dry lying flat so that the pre-curved peak keeps its curve.
The hook-and-loop closure allows width adjustment in the range of approximately 55 to 60 centimetres head circumference and thus fits the majority of adult sizes. For very small or very large head sizes beyond this range we recommend alternative fitted models with size-specific fit.
The consistent tone-in-tone finish without a visible front label leaves the signature area to your own team or company logo rather than occupying it with the manufacturer brand. For corporate weari programmes and club kit this is a decisive detail that clearly sets the AT533 apart from brand-heavy standard caps.
Erhältliche Farben
Discover similar products
AT113
AT108
AT109
AT516
AT423
AT698
AT129
AT614
AT418
Ready for the twill cap in the team?
The AT533 Atlantis Gear-S Cap: tiered pricing from 25 pieces, purchase on invoice, fast dispatch.
Order now